Office of Operations
21st Century Operations Using 21st Century Technologies

Approaches to Target Setting for PM3 Measures

Foreword

Notice

This document is disseminated under the sponsorship of the U.S. Department of Transportation in the interest of information exchange. The U.S. Government assumes no liability for the use of the information contained in this document.

Except for any statutes or regulations cited, the contents of this document do not have the force and effect of law and are not meant to bind the States or the public in any way. This document is intended only to provide information regarding existing requirements under the law or agency policies.

The U.S. Government does not endorse products or manufacturers. Trademarks or manufacturers’ names appear in this report only because they are considered essential to the objective of the document.

Quality Assurance Statement

The Federal Highway Administration (FHWA) provides high-quality information to serve Government, industry, and the public in a manner that promotes public understanding. Standards and policies are used to ensure and maximize the quality, objectivity, utility, and integrity of its information. The FHWA periodically reviews quality issues and adjusts its programs and processes to ensure continuous quality improvement.

Technical Report Documentation Page

1. Report No.

FHWA-HOP-19-056

2. Government Accession No.

3. Recipient’s Catalog No.

4. Title and Subtitle

Approaches to Target Setting for PM3 Measures

5. Report Date

October 2022

6. Performing Organization Code

7. Author(s)

Christopher Lindsey, Mark Hallenbeck, Moggan Motamed, and Richard Margiotta

8. Performing Organization Report No.

9. Performing Organization Name and Address

Cambridge Systematics Inc.
101 Station Landing, Suite 410
Medford, MA 02155

10. Work Unit No. (TRAIS)

11. Contract or Grant No.

DTFH61-16-D-00051

12. Sponsoring Agency Name and Address

U.S. Department of Transportation
Federal Highway Administration
Office of Operations
1200 New Jersey Avenue, SE
Washington, DC 20590

13. Type of Report and Period Covered

14. Sponsoring Agency Code

HOP

15. Supplementary Notes

Task Order Contracting Officer’s Representative (TOCOR) is Rich Taylor

16. Abstract

Targets and measures are key components of performance management and are critical to communicating information about the transportation system to decision-makers, stakeholders, and the traveling public. Target setting for travel time-based measures has emerged as a challenge in transitioning to a performance management-based approach for making transportation investment and policy decisions, as mandated by Moving Ahead for Progress in the 21st Century Act (MAP-21) and Fixing America’s Surface Transportation (FAST) Act. This report provides potential approaches and resources to State Departments of Transportation (DOT) and local agencies to help overcome those challenges. Approaches include technical options for developing the information to support target setting.

17. Key Words

performance management, transportation investment, policy, target, target setting, stakeholders

18. Distribution Statement

No restrictions.

19. Security Classif. (of this report)

Unclassified

20. Security Classif. (of this page)

Unclassified

21. No of Pages

64

22. Price

N/A

Form DOT F 1700.7 (8-72)                                                                      Reproduction of completed pages authorized

SI (Modern Metric)

Approximate Conversions to SI Units
Symbol When You Know Multiply By To Find Symbol
Length
in inches 25.4 millimeters mm
ft feet 0.305 meters m
yd yards 0.914 meters m
mi miles 1.61 kilometers km
Area
in2 square inches 645.2 square millimeters mm2
ft2 square feet 0.093 square meters m2
yd2 square yard 0.836 square meters m2
ac acres 0.405 hectares ha
mi2 square miles 2.59 square kilometers km2
Volume
fl oz fluid ounces 29.57 milliliters mL
gal gallons 3.785 liters L
ft3 cubic feet 0.028 cubic meters m3
yd3 cubic yards 0.765 cubic meters m3
NOTE: volumes greater than 1000 L shall be shown in m3
Mass
oz ounces 28.35 grams g
lb pounds 0.454 kilograms kg
T short tons (2000 lb) 0.907 megagrams (or "metric ton") Mg (or "t")
Temperature (exact degrees)
°F Fahrenheit 5 (F-32)/9 or (F-32)/1.8 Celsius °C
Illumination
fc foot-candles 10.76 lux lx
fl foot-Lamberts 3.426 candela/m2 cd/m2
Force and Pressure or Stress
lbf poundforce 4.45 newtons N
lbf/in2 poundforce per square inch 6.89 kilopascals kPa

Conversion Factors

Approximate Conversions from SI Units
Symbol When You Know Multiply By To Find Symbol
Length
mm millimeters 0.039 inches in
m meters 3.28 feet ft
m meters 1.09 yards yd
km kilometers 0.621 miles mi
Area
mm2 square millimeters 0.0016 square inches in2
m2 square meters 10.764 square feet ft2
m2 square meters 1.195 square yards yd2
ha hectares 2.47 acres ac
km2 square kilometers 0.386 square miles mi2
Volume
mL milliliters 0.034 fluid ounces fl oz
L liters 0.264 gallons gal
m3 cubic meters 35.314 cubic feet ft3
m3 cubic meters 1.307 cubic yards yd3
Mass
g grams 0.035 ounces oz
kg kilograms 2.202 pounds lb
Mg (or "t") megagrams (or "metric ton") 1.103 short tons (2000 lb) T
Temperature (exact degrees)
°C Celsius 1.8C+32 Fahrenheit °F
Illumination
lx lux 0.0929 foot-candles fc
cd/m2 candela/m2 0.2919 foot-Lamberts fl
Force and Pressure or Stress
N newtons 02.225 poundforce lbf
kPa kilopascals 0.145 poundforce per square inch lbf/in2

Note: SI is the symbol for the International System of Units. Appropriate rounding should be made to comply with Section 4 of ASTM E380. (Revised March 2003)