Model Systems Engineering Documents for Closed Circuit Television (CCTV) Systems
Appendix B: System Requirements Table of Sample Statements
| Requirements Document Reference Number | System Requirements Sample Statements | Need Statement (ConOps) |
|---|---|---|
| 3.1 | Functional System Requirements |  |
| 3.1.1 | Access Control | |
| 3.1.1.1 | The CCTV System shall enforce access control of all users. | 4.1.1 The CCTV System Manager needs access to the CCTV System. |
| 3.1.1.2 | The CCTV System shall allow the CCTV System Manager to assign access control credentials to CCTV System Users. | 4.1.1.1.1 The CCTV System Manager needs to configure CCTV System User access. |
| 3.1.1.3 | The CCTV System shall allow the CCTV System Manager to assign access control credentials to CCTV System Maintainers. | 4.1.1.1.2 The CCTV System Manager needs to configure CCTV System Maintainer access. |
| 3.1.1.4 | The CCTV System shall allow the CCTV System Manager to assign access control credentials to External Systems. | 4.1.1.1.3 The CCTV System Manager needs to configure External System access. |
| 3.1.1.5 | The CCTV System shall allow the CCTV System Manager to receive distributed video. | 4.1.1.2 The CCTV System Manager needs access to the CCTV System to receive distributed video. |
| 3.1.1.6 | The CCTV System shall allow the CCTV System Manager to select cameras. | 4.1.1.3 The CCTV System Manager needs access to the CCTV System to select cameras. |
| 3.1.1.7 | The CCTV System shall allow the CCTV System Manager to control cameras. | 4.1.1.4 The CCTV System Manager needs access to the CCTV System to control cameras. |
| 3.1.1.8 | The CCTV System shall allow the CCTV System Manager to route input video to designated video outputs. (Outputs are displays or external channels.) | 4.1.1.5 The CCTV System Manager needs access to the CCTV System to control video distribution. |
| 3.1.1.9 | The CCTV System shall allow the CCTV System User to receive distributed video. | 4.1.2.1 The CCTV System User needs access to the CCTV System to receive distributed video. |
| 3.1.1.10 | The CCTV System shall allow the CCTV System User to select cameras. | 4.1.2.2 The CCTV System User needs access to the CCTV System to select cameras. |
| 3.1.1.11 | The CCTV System shall allow the CCTV System User to control cameras. | 4.1.2.3 The CCTV System User needs access to the CCTV System to control cameras. |
| 3.1.1.12 | The CCTV System shall allow the CCTV System User to route input video to designated video outputs. (Outputs are displays or external channels.) | 4.1.2.4 The CCTV System User needs access to the CCTV System to control video distribution. |
| 3.1.1.13 | The CCTV System shall allow the CCTV System Maintainer to receive distributed video. | 4.1.3.1 The CCTV System Maintainer needs access to the CCTV System to receive distributed video. |
| 3.1.1.14 | The CCTV System shall allow the CCTV System Maintainer to select cameras. | 4.1.3.2 The CCTV System Maintainer needs access to the CCTV System to select cameras. |
| 3.1.1.15 | The CCTV System shall allow the CCTV System Maintainer to control cameras. | 4.1.3.3 The CCTV System Maintainer needs access to the CCTV System to control cameras. |
| 3.1.1.16 | The CCTV System shall allow the CCTV System Maintainer to route input video to designated video outputs. (Outputs are displays or external channels.) | 4.1.3.4 The CCTV System Maintainer needs access to the CCTV System to control video distribution. |
| 3.1.1.17 | The CCTV System shall allow the CCTV System Maintainer to run system diagnostics and testing. | 4.1.3.5 The CCTV System Maintainer needs access to the CCTV System to run system diagnostics and testing. |
| 3.1.1.18 | The CCTV System shall allow the CCTV System Maintainer access for repairs. | 4.1.3.6 The CCTV System Maintainer needs access to the CCTV System to repair it. |
| 3.1.1.19 | The CCTV System shall allow an External System to receive distributed video. | 4.1.4.1 The External System needs access to the CCTV System to receive distributed video. |
| 3.1.1.20 | The CCTV System shall allow an External System to select cameras. | 4.1.4.2 The External System needs access to the CCTV System to select cameras. |
| 3.1.1.21 | The CCTV System shall allow an External System to control cameras. | 4.1.4.3 The External System needs access to the CCTV System to control cameras. |
| 3.1.1.22 | The CCTV System shall allow an External System to route input video to designated video outputs. (Outputs are displays or external channels.) | 4.1.4.4 The External System needs access to the CCTV System to control video distribution. |
| 3.1.2 | Camera Selection | |
| 3.1.2.1 | The CCTV System shall identify to the CCTV System User the closest camera(s) based on the location specified by the user. | 4.3.1 The CCTV System User needs to identify cameras with a view of a location of interest. |
| 3.1.2.2 | The CCTV System shall allow the CCTV System User to view CCTV cameras available for viewing. | 4.4.1 The CCTV System User needs to select camera feeds to display on video monitors. |
| 3.1.2.3 | The CCTV System shall allow the CCTV System User to route a CCTV camera feed to a specified video monitor. | 4.4.1 The CCTV System User needs to select camera feeds to display on video monitors. |
| 3.1.2.4 | The CCTV System shall allow the CCTV System User to route a CCTV camera feed to more than one video monitor. | 4.4.1 The CCTV System User needs to select camera feeds to display on video monitors. |
| 3.1.2.5 | The CCTV System shall allow the CCTV System User to view CCTV cameras available to be controlled. | 4.4.3 The CCTV System User needs to request control of a camera. |
| 3.1.3 | Camera Control | |
| 3.1.3.1 | CCTV System Control | |
| 3.1.3.1.1 | The CCTV System shall allow a CCTV System User to control the camera being viewed. (If so configured by the CCTV System Manager). | 4.4.2 The CCTV System User needs to control the camera being viewed. |
| 3.1.3.1.1.1 | The CCTV System shall allow a CCTV System User to rotate the camera about a vertical axis (pan the camera). | 4.4.2 The CCTV System User needs to control the camera being viewed. |
| 3.1.3.1.1.2 | The CCTV System shall allow a CCTV System User to zoom the camera. | 4.4.2 The CCTV System User needs to control the camera being viewed. |
| 3.1.3.1.1.3 | The CCTV System shall allow a CCTV System User to rotate the camera about a horizontal axis at right angles to the direction the camera is pointing (tilt the camera). | 4.4.2 The CCTV System User needs to control the camera being viewed. |
| 3.1.3.1.2 | The CCTV System shall allow a CCTV System User to request control of a camera (If so configured by the CCTV System Manager). | 4.4.3 The CCTV System User needs to request control of a camera. |
| 3.1.3.1.3 | The CCTV System shall allow a CCTV System User to reassign control of a camera to another user. | 4.4.4 The CCTV System User needs to reassign control of a camera to different user. |
| 3.1.3.1.4 | The CCTV System shall allow the CCTV System User to configure [specify number] individual camera presets. (A preset includes the pan, tilt, and zoom settings). | 4.4.5 The CCTV System User needs to configure [specify number] camera presets (PTZ settings). |
| 3.1.3.1.5 | The CCTV System shall allow a CCTV System User to return a camera to a preset location with specified accuracy. [Specify the accuracy requirements.] | 4.4.5.1 The CCTV System User needs to return the camera to a preset location repeatedly and accurately [define accurate-this will be a much stiffer standard for cameras that are used for detection, versus cameras used just for viewing. This need should describe both to support their separate requirements. For detection, the camera must reset so that the detection zone remains in the correct lane and location, probably with an accuracy in the viewed field of +/- 1 feet. For viewing, the reset field of view needs to be recognizably the correct location at full zoom.]. 4.12.3 |
| 3.1.3.1.6 | The CCTV System shall allow a CCTV System User to direct a camera to tour its defined presets. | 4.4.5.2 The CCTV System User needs to program cameras to tour their coverage area. |
| 3.1.3.1.7 | Verification of Field Device Status | 4.6 Verify Non-CCTV Field Device Status using CCTV |
| 3.1.3.1.7.1 | The CCTV System shall allow the CCTV System User to select a CCTV camera feed assigned to a field device to be displayed on specified video monitors. | 4.6.1 The CCTV System User needs to select displayed camera feeds of field devices to display on video monitors. |
| 3.1.3.1.7.2 | The CCTV System shall allow the CCTV System User to select a CCTV camera feed verifying transportation asset operation to be displayed on specified video monitors. | 4.6.2 The CCTV System User needs to verify transportation asset operation using CCTV. 4.6.2.1 4.6.2.2 4.6.2.3 4.6.2.4 4.6.2.5 4.6.2.6 4.6.2.7 4.6.2.8 |
| 3.1.3.1.7.3 | The CCTV camera shall be equipped with a lens that provides the necessary coverage to view that field device without using digital zoom. | 4.6.2 The CCTV System User needs to verify transportation asset operation using CCTV. 4.6.2.1 4.6.2.2 4.6.2.3 4.6.2.4 4.6.2.5 4.6.2.6 4.6.2.7 4.6.2.8 |
| 3.1.3.1.8.1 | The CCTV System shall relinquish control upon CCTV System User command. | 4.7.1.1 The CCTV System User will need to manually relinquish control of a camera to make it available for other users. |
| 3.1.3.2 | Remote Control | 4.9 Remote Control of a CCTV Device |
| 3.1.3.2.1 | The CCTV System shall allow an External System to request a change in the parameters of a CCTV camera. | 4.9.1 The External System needs to request a change to the parameters of a CCTV device, such as camera position, operated by another center in order to view an event, see real-time traffic conditions, or verify an incident. |
| 3.1.3.2.1.1 | The CCTV System shall allow an External System to request a change in the camera position parameters of a CCTV camera. | 4.9.1 The External System needs to request a change to the parameters of a CCTV device, such as camera position, operated by another center in order to view an event, see real-time traffic conditions, or verify an incident. |
| 3.1.3.2.1.2 | The CCTV System shall allow an External System to request a change in the parameters to view an event by a CCTV camera. | 4.9.1 The External System needs to request a change to the parameters of a CCTV device, such as camera position, operated by another center in order to view an event, see real-time traffic conditions, or verify an incident. |
| 3.1.3.2.1.3 | The CCTV System shall allow an External System to request a change in the parameters for viewing real-time traffic conditions by a CCTV camera. | 4.9.1 The External System needs to request a change to the parameters of a CCTV device, such as camera position, operated by another center in order to view an event, see real-time traffic conditions, or verify an incident. |
| 3.1.3.2.1.4 | The CCTV System shall allow an External System to request a change in the parameters for verifying an incident by a CCTV camera. | 4.9.1 The External System needs to request a change to the parameters of a CCTV device, such as camera position, operated by another center in order to view an event, see real-time traffic conditions, or verify an incident. |
| 3.1.3.2.2 | The CCTV System shall allow an External System to monitor cameras. | 4.9.2 The External System needs to monitor cameras from external locations. |
| 3.1.3.2.3 | The CCTV System shall allow an External System to control cameras. | 4.9.3 The External System needs to control cameras from external locations. |
| 3.1.4 | Video Stream Management | |
| 3.1.4.1 | Video Dissemination | |
| 3.1.4.1.1 | The CCTV System shall allow a CCTV System Manager to create low bandwidth [specify attributes] copies of video feeds. | 4.5.1 The CCTV System User needs to create low bandwidth copies of CCTV video feeds and make them available to the general public via internet sites. |
| 3.1.4.1.1 | The CCTV System shall allow a CCTV System Manager to create low bandwidth [specify attributes] copies of video feeds. | 4.5.4 The CCTV System User needs to be able to share video streams/images with regional stakeholders (e.g., state and local DOTs, police, fire). (This may be done by using an external video feed or a web page.) [Choose the appropriate requirement.] |
| 3.1.4.1.2 | The CCTV System shall make available the low bandwidth video feeds to a web-page server. [Specify the requirements imposed by the web-page server.] | 4.5.1 The CCTV System User needs to create low bandwidth copies of CCTV video feeds and make them available to the general public via internet sites. 4.5.4 |
| 3.1.4.1.3 | The CCTV System shall make available the low bandwidth video feeds to an external interface. [Specify interface requirements. This requirement may need to be repeated for each of multiple external interfaces.] | 4.5.2 The CCTV System User needs to create low bandwidth copies of CCTV video feeds and make them available to the media and Information Service Providers through a media feed. 4.5.4 4.5.5 4.5.6 4.5.7 4.5.8 |
| 3.1.4.1.4 | The CCTV System shall allow the CCTV System User to disable immediately any individual external video feed. | 4.5.3 The CCTV System User needs to disable any or all public video feeds at will, such as during emergencies, security events or other events of a sensitive nature. 4.9.4 |
| 3.1.4.1.5 | The CCTV System shall allow the CCTV System User to disable immediately all external video feeds. | 4.5.3 The CCTV System User needs to disable any or all public video feeds at will, such as during emergencies, security events or other events of a sensitive nature. |
| 3.1.4.1.6 | The CCTV System shall allow the CCTV System User to share video with other stakeholders outside of the region. | 4.5.5 The CCTV System User needs to be able to share video streams/images with other stakeholders. |
| 3.1.4.1.7 | The CCTV System shall provide video streams/images to a regional video clearinghouse as configured by the CCTV System User. | 4.5.6 The CCTV System User needs to be able to share video streams/images through a regional video clearinghouse. |
| 3.1.4.1.8 | The CCTV System shall provide video streams/images to a traveler information system as configured by the CCTV System User. | 4.5.7 The CCTV System User needs to provide real-time video feeds to the traveler information system. |
| 3.1.4.1.9 | The CCTV System shall provide real-time incident video to the public/media for major arterials as configured by the CCTV System User. | 4.5.8 The CCTV System User needs to provide real-time incident information to the public/media for major arterials. |
| 3.1.4.1.10 | The CCTV System shall be configured by the CCTV System User to provide direct video to individual users of an External System. | 4.5.9 The CCTV System User needs to configure the CCTV system for individual users of external system to which the video will be directed. (When there is no knowledge of an external system's users, it acts in the role of a CCTV System User. If it acts as an external system, it must provide the ability to reach its individual users to fulfill the requirements associated with this need.) |
| 3.1.4.1.11 | The CCTV System shall be configured by the CCTV System Manager to set the maximum number of simultaneous video feeds directed to a single user. | 4.5.10 The CCTV System Manager needs to configure the maximum number of video feeds that can be simultaneously displayed by any one user. |
| 3.1.4.1.12 | The CCTV System shall allow the CCTV System User to direct video from non-camera sources to the video displays. | 4.5.11 The CCTV System User needs to direct video from non-camera sources to video monitors managed by the system. |
| 3.1.4.1.12.1 | The CCTV System shall allow the CCTV System User to direct broadcast television programming to the CCTV System video displays. | 4.5.11.1 The CCTV System User needs to direct broadcast television programming to video displays managed by the system. |
| 3.1.4.1.12.2 | The CCTV System shall allow the CCTV System User to direct externally supplied video streams to the CCTV System video displays. | 4.5.11.2 The CCTV System User needs to direct externally supplied video streams to video displays managed by the system. |
| 3.1.4.1.12.3 | The CCTV System shall allow the CCTV System User to direct externally supplied base-band video signals to the CCTV System video displays. | 4.5.11.3 The CCTV System User needs to display external base-band video. (Base-band video is an analog video signal.) |
| 3.1.4.2 | Relinquish Camera Control | 4.7 Relinquishing CCTV Camera Control |
| 3.1.4.2.1 | The CCTV System shall allow the CCTV System User to relinquish control of the CCTV cameras. | 4.7.1 The CCTV System User needs to relinquish control via the CCTV System. |
| 3.1.4.2.1.1 | The CCTV System shall allow the CCTV System User to manually relinquish control of a camera to make it available to other users. | 4.7.1.1 The CCTV System User will need to manually relinquish control of a camera to make it available for other users. |
| 3.1.4.2.1.2 | The CCTV System shall allow the CCTV System User to configure a period of non-use after which the system will automatically relinquish control of a camera to make it available to other users. | 4.7.1.2 The CCTV System User needs to relinquish control automatically after a period of non-use, which the user needs to configure. |
| 3.1.5 | CCTV Automatic Detection | 4.8 CCTV Automatic Detection [Model document users must provide the expansion, and related requirements.] |
| 3.1.5.1 | The CCTV System shall automatically detect incidents on mainline lanes. Incident identification includes disabled vehicles, crashes, unplanned work zones and other unplanned events requiring viewing. | 4.8.1 The CCTV System User needs to provide automatic identification and notification of incidents on mainline lanes. Incidents include disabled vehicles, crashes, unplanned work zones, and other unplanned events that require viewing. |
| 3.1.5.2 | The CCTV System shall automatically identify incidents on mainline lanes. Incident identification includes disabled vehicles, crashes, unplanned work zones and other unplanned events requiring viewing. | 4.8.1 The CCTV System User needs to provide automatic identification and notification of incidents on mainline lanes. Incidents include disabled vehicles, crashes, unplanned work zones, and other unplanned events that require viewing. |
| 3.1.5.3 | The CCTV System shall automatically notify the CCTV System User of incidents on mainline lanes. Incident identification includes disabled vehicles, crashes, unplanned work zones and other unplanned events requiring viewing. | 4.8.1 The CCTV System User needs to provide automatic identification and notification of incidents on mainline lanes. Incidents include disabled vehicles, crashes, unplanned work zones, and other unplanned events that require viewing. |
| 3.1.5.4 | The CCTV System shall automatically detect incidents on ramps. Incident identification includes disabled vehicles, crashes, unplanned work zones and other unplanned events requiring viewing. | 4.8.2 The CCTV System User needs to provide automatic identification and notification of incidents on ramps. Incidents include disabled vehicles, crashes, unplanned work zones, and other unplanned events that require viewing. |
| 3.1.5.5 | The CCTV System shall automatically identify incidents on ramps. Incident identification includes disabled vehicles, crashes, unplanned work zones and other unplanned events requiring viewing. | 4.8.2 The CCTV System User needs to provide automatic identification and notification of incidents on ramps. Incidents include disabled vehicles, crashes, unplanned work zones, and other unplanned events that require viewing. 4.8.5 |
| 3.1.5.6 | The CCTV System shall automatically notify the CCTV System User of incidents on ramps. Incident identification includes disabled vehicles, crashes, unplanned work zones and other unplanned events requiring viewing. | 4.8.2 The CCTV System User needs to provide automatic identification and notification of incidents on ramps. Incidents include disabled vehicles, crashes, unplanned work zones, and other unplanned events that require viewing. |
| 3.1.5.7 | The CCTV System shall automatically detect incidents on shoulders. Incident identification includes disabled vehicles, crashes, unplanned work zones and other unplanned events requiring viewing. | 4.8.3 The CCTV System User needs to provide automatic identification and notification of incidents on shoulders. Incidents include disabled vehicles, crashes, unplanned work zones, and other unplanned events that require viewing. |
| 3.1.5.8 | The CCTV System shall automatically identify incidents on shoulders. Incident identification includes disabled vehicles, crashes, unplanned work zones and other unplanned events requiring viewing. | 4.8.3 The CCTV System User needs to provide automatic identification and notification of incidents on shoulders. Incidents include disabled vehicles, crashes, unplanned work zones, and other unplanned events that require viewing. |
| 3.1.5.9 | The CCTV System shall automatically notify the CCTV System User of incidents on shoulders. Incident identification includes disabled vehicles, crashes, unplanned work zones and other unplanned events requiring viewing. | 4.8.3 The CCTV System User needs to provide automatic identification and notification of incidents on shoulders. Incidents include disabled vehicles, crashes, unplanned work zones, and other unplanned events that require viewing. |
| 3.1.5.10 | The CCTV System shall automatically detect wrong way vehicles. | 4.8.4 The CCTV System User needs automatic identification and notification of wrong-way vehicles. |
| 3.1.5.11 | The CCTV System shall automatically identify wrong way vehicles. | 4.8.4 The CCTV System User needs automatic identification and notification of wrong-way vehicles. |
| 3.1.5.12 | The CCTV System shall automatically notify the CCTV System User of wrong way vehicles. | 4.8.4 The CCTV System User needs automatic identification and notification of wrong-way vehicles. |
| 3.1.6 | System Management | |
| 3.1.6.1 | Configuration | |
| 3.1.6.1.1 | The CCTV System shall allow the CCTV System User to configure which users have permission to configure the CCTV System. | 4.2.1.1 The CCTV System Manager needs to configure user permissions for configuration. |
| 3.1.6.1.2 | The CCTV System shall allow the CCTV System User to configure which users have permission to view video. | 4.2.1.2 The CCTV System Manager needs to configure user permissions for video viewing. |
| 3.1.6.1.3 | The CCTV System shall allow the CCTV System User to configure which users have permission to select a specified camera. | 4.2.1.3 The CCTV System Manager needs to configure user permissions for camera selection. |
| 3.1.6.1.4 | The CCTV System shall allow the CCTV System User to configure which users have permission to control a specified camera. | 4.2.1.4 The CCTV System Manager needs to configure user permissions for camera control. |
| 3.1.6.1.5 | The CCTV System shall accommodate [specify number of users] users accessing the CCTV System based on configuration parameters by the CCTV System User. [This requirement can be supplemented to define parameters such as types of users and corresponding bandwidth usage.] | 4.2.2 The CCTV System Manager needs to accommodate [specify] users with access to the CCTV System. [This may be further defined by type of user and their bandwidth consumption.] |
| 3.1.6.1.6 | The CCTV System shall arbitrate competing requests for CCTV System resources based on configuration parameters by the CCTV System User. | 4.2.3 The CCTV System Manager needs to configure the system to arbitrate competing requests for access, including providing automatic timeouts, transfer of access, and other camera control user access issues. [Describe the desired operation, and choose the requirements relevant to the desired operation. Options: Camera ownership, last user control, first-come-first-served, etc.] |
| 3.1.6.1.6.1 | The CCTV System shall arbitrate competing requests for CCTV System resources for camera available for viewing based on an ownership configuration parameter by the CCTV System User. | 4.2.3 The CCTV System Manager needs to configure the system to arbitrate competing requests for access, including providing automatic timeouts, transfer of access, and other camera control user access issues. [Describe the desired operation, and choose the requirements relevant to the desired operation. Options: Camera ownership, last user control, first-come-first-served, etc.] |
| 3.1.6.1.6.2 | The CCTV System shall arbitrate competing requests for CCTV System resources for camera available for viewing based on a priority configuration parameter by the CCTV System User. | 4.2.3 The CCTV System Manager needs to configure the system to arbitrate competing requests for access, including providing automatic timeouts, transfer of access, and other camera control user access issues. [Describe the desired operation, and choose the requirements relevant to the desired operation. Options: Camera ownership, last user control, first-come-first-served, etc.] |
| 3.1.6.1.6.3 | The CCTV System shall arbitrate competing requests for CCTV System resources for camera available for viewing based on a usage timeout configuration parameter by the CCTV System User. | 4.2.3 The CCTV System Manager needs to configure the system to arbitrate competing requests for access, including providing automatic timeouts, transfer of access, and other camera control user access issues. [Describe the desired operation, and choose the requirements relevant to the desired operation. Options: Camera ownership, last user control, first-come-first-served, etc.] |
| 3.1.6.1.6.4 | The CCTV System shall arbitrate competing requests for CCTV System resources for camera available for viewing based on a first come first served configuration parameter by the CCTV System User. | 4.2.3 The CCTV System Manager needs to configure the system to arbitrate competing requests for access, including providing automatic timeouts, transfer of access, and other camera control user access issues. [Describe the desired operation, and choose the requirements relevant to the desired operation. Options: Camera ownership, last user control, first-come-first-served, etc.] |
| 3.1.6.1.6.5 | The CCTV System shall arbitrate competing requests for CCTV System resources for camera available for viewing based on a [specify other] configuration parameter by the CCTV System User. | 4.2.3 The CCTV System Manager needs to configure the system to arbitrate competing requests for access, including providing automatic timeouts, transfer of access, and other camera control user access issues. [Describe the desired operation, and choose the requirements relevant to the desired operation. Options: Camera ownership, last user control, first-come-first-served, etc.] |
| 3.1.6.1.6.6 | The CCTV System shall arbitrate competing requests for CCTV System resources for camera control based on an ownership configuration parameter by the CCTV System User. | 4.2.3 The CCTV System Manager needs to configure the system to arbitrate competing requests for access, including providing automatic timeouts, transfer of access, and other camera control user access issues. [Describe the desired operation, and choose the requirements relevant to the desired operation. Options: Camera ownership, last user control, first-come-first-served, etc.] |
| 3.1.6.1.6.7 | The CCTV System shall arbitrate competing requests for CCTV System resources for camera control based on a priority configuration parameter by the CCTV System User. | 4.2.3 The CCTV System Manager needs to configure the system to arbitrate competing requests for access, including providing automatic timeouts, transfer of access, and other camera control user access issues. [Describe the desired operation, and choose the requirements relevant to the desired operation. Options: Camera ownership, last user control, first-come-first-served, etc.] |
| 3.1.6.1.6.8 | The CCTV System shall arbitrate competing requests for CCTV System resources for camera control based on a usage timeout configuration parameter by the CCTV System User. | 4.2.3 The CCTV System Manager needs to configure the system to arbitrate competing requests for access, including providing automatic timeouts, transfer of access, and other camera control user access issues. [Describe the desired operation, and choose the requirements relevant to the desired operation. Options: Camera ownership, last user control, first-come-first-served, etc.] |
| 3.1.6.1.6.9 | The CCTV System shall arbitrate competing requests for CCTV System resources for camera control based on a first come first served configuration parameter by the CCTV System User. | 4.2.3 The CCTV System Manager needs to configure the system to arbitrate competing requests for access, including providing automatic timeouts, transfer of access, and other camera control user access issues. [Describe the desired operation, and choose the requirements relevant to the desired operation. Options: Camera ownership, last user control, first-come-first-served, etc.] |
| 3.1.6.1.6.10 | The CCTV System shall arbitrate competing requests for CCTV System resources for camera control based on a [specify other] configuration parameter by the CCTV System User. | 4.2.3 The CCTV System Manager needs to configure the system to arbitrate competing requests for access, including providing automatic timeouts, transfer of access, and other camera control user access issues. [Describe the desired operation, and choose the requirements relevant to the desired operation. Options: Camera ownership, last user control, first-come-first-served, etc.] |
| 3.1.6.1.6.11 | The CCTV System shall arbitrate competing requests for CCTV System resources for display monitor availability based on an ownership configuration parameter by the CCTV System User. | 4.2.3 The CCTV System Manager needs to configure the system to arbitrate competing requests for access, including providing automatic timeouts, transfer of access, and other camera control user access issues. [Describe the desired operation, and choose the requirements relevant to the desired operation. Options: Camera ownership, last user control, first-come-first-served, etc.] |
| 3.1.6.1.6.12 | The CCTV System shall arbitrate competing requests for CCTV System resources for display monitor availability based on a priority configuration parameter by the CCTV System User. | 4.2.3 The CCTV System Manager needs to configure the system to arbitrate competing requests for access, including providing automatic timeouts, transfer of access, and other camera control user access issues. [Describe the desired operation, and choose the requirements relevant to the desired operation. Options: Camera ownership, last user control, first-come-first-served, etc.] |
| 3.1.6.1.6.13 | The CCTV System shall arbitrate competing requests for CCTV System resources for display monitor availability based on a usage timeout configuration parameter by the CCTV System User. | 4.2.3 The CCTV System Manager needs to configure the system to arbitrate competing requests for access, including providing automatic timeouts, transfer of access, and other camera control user access issues. [Describe the desired operation, and choose the requirements relevant to the desired operation. Options: Camera ownership, last user control, first-come-first-served, etc.] |
| 3.1.6.1.6.14 | The CCTV System shall arbitrate competing requests for CCTV System resources for display monitor availability based on a first come first served configuration parameter by the CCTV System User. | 4.2.3 The CCTV System Manager needs to configure the system to arbitrate competing requests for access, including providing automatic timeouts, transfer of access, and other camera control user access issues. [Describe the desired operation, and choose the requirements relevant to the desired operation. Options: Camera ownership, last user control, first-come-first-served, etc.] |
| 3.1.6.1.6.15 | The CCTV System shall arbitrate competing requests for CCTV System resources for display monitor availability based on a [specify other] configuration parameter by the CCTV System User. | 4.2.3 The CCTV System Manager needs to configure the system to arbitrate competing requests for access, including providing automatic timeouts, transfer of access, and other camera control user access issues. [Describe the desired operation, and choose the requirements relevant to the desired operation. Options: Camera ownership, last user control, first-come-first-served, etc.] |
| 3.1.6.1.6.16 | The CCTV System shall arbitrate competing requests for CCTV System resources for communications based on an ownership configuration parameter by the CCTV System User. | 4.2.3 The CCTV System Manager needs to configure the system to arbitrate competing requests for access, including providing automatic timeouts, transfer of access, and other camera control user access issues. [Describe the desired operation, and choose the requirements relevant to the desired operation. Options: Camera ownership, last user control, first-come-first-served, etc.] |
| 3.1.6.1.6.17 | The CCTV System shall arbitrate competing requests for CCTV System resources for communications based on a priority configuration parameter by the CCTV System User. | 4.2.3 The CCTV System Manager needs to configure the system to arbitrate competing requests for access, including providing automatic timeouts, transfer of access, and other camera control user access issues. [Describe the desired operation, and choose the requirements relevant to the desired operation. Options: Camera ownership, last user control, first-come-first-served, etc.] |
| 3.1.6.1.6.18 | The CCTV System shall arbitrate competing requests for CCTV System resources for communications based on a usage timeout configuration parameter by the CCTV System User. | 4.2.3 The CCTV System Manager needs to configure the system to arbitrate competing requests for access, including providing automatic timeouts, transfer of access, and other camera control user access issues. [Describe the desired operation, and choose the requirements relevant to the desired operation. Options: Camera ownership, last user control, first-come-first-served, etc.] |
| 3.1.6.1.6.19 | The CCTV System shall arbitrate competing requests for CCTV System resources for communications based on a first come first served configuration parameter by the CCTV System User. | 4.2.3 The CCTV System Manager needs to configure the system to arbitrate competing requests for access, including providing automatic timeouts, transfer of access, and other camera control user access issues. [Describe the desired operation, and choose the requirements relevant to the desired operation. Options: Camera ownership, last user control, first-come-first-served, etc.] |
| 3.1.6.1.6.20 | The CCTV System shall arbitrate competing requests for CCTV System resources for communications based on a [specify other] configuration parameter by the CCTV System User. | 4.2.3 The CCTV System Manager needs to configure the system to arbitrate competing requests for access, including providing automatic timeouts, transfer of access, and other camera control user access issues. [Describe the desired operation, and choose the requirements relevant to the desired operation. Options: Camera ownership, last user control, first-come-first-served, etc.] |
| 3.1.6.1.6.21 | The CCTV System shall arbitrate competing requests for CCTV System resources for [specify other] based on an ownership configuration parameter by the CCTV System User. | 4.2.3 The CCTV System Manager needs to configure the system to arbitrate competing requests for access, including providing automatic timeouts, transfer of access, and other camera control user access issues. [Describe the desired operation, and choose the requirements relevant to the desired operation. Options: Camera ownership, last user control, first-come-first-served, etc.] |
| 3.1.6.1.6.22 | The CCTV System shall arbitrate competing requests for CCTV System resources for [specify other] based on a priority configuration parameter by the CCTV System User. | 4.2.3 The CCTV System Manager needs to configure the system to arbitrate competing requests for access, including providing automatic timeouts, transfer of access, and other camera control user access issues. [Describe the desired operation, and choose the requirements relevant to the desired operation. Options: Camera ownership, last user control, first-come-first-served, etc.] |
| 3.1.6.1.6.23 | The CCTV System shall arbitrate competing requests for CCTV System resources for [specify other] based on a usage timeout configuration parameter by the CCTV System User. | 4.2.3 The CCTV System Manager needs to configure the system to arbitrate competing requests for access, including providing automatic timeouts, transfer of access, and other camera control user access issues. [Describe the desired operation, and choose the requirements relevant to the desired operation. Options: Camera ownership, last user control, first-come-first-served, etc.] |
| 3.1.6.1.6.24 | The CCTV System shall arbitrate competing requests for CCTV System resources for [specify other] based on a first come first served configuration parameter by the CCTV System User. | 4.2.3 The CCTV System Manager needs to configure the system to arbitrate competing requests for access, including providing automatic timeouts, transfer of access, and other camera control user access issues. [Describe the desired operation, and choose the requirements relevant to the desired operation. Options: Camera ownership, last user control, first-come-first-served, etc.] |
| 3.1.6.1.6.25 | The CCTV System shall arbitrate competing requests for CCTV System resources for [specify other] based on a [specify other] configuration parameter by the CCTV System User. | 4.2.3 The CCTV System Manager needs to configure the system to arbitrate competing requests for access, including providing automatic timeouts, transfer of access, and other camera control user access issues. [Describe the desired operation, and choose the requirements relevant to the desired operation. Options: Camera ownership, last user control, first-come-first-served, etc.] |
| 3.1.6.1.7 | The CCTV System shall accept parameters for controlling the video performance of video streams supplied to external systems. (This control may be provided in the communications or digital video standard being supported.) [Specify the performance requirements for the external video streams] | 4.2.4 The CCTV System Manager needs to configure the performance of video streams directed to external destinations based on the capabilities and limitations of the external system and communications. 4.5.1 |
| 3.1.6.1.8 | The CCTV System shall accept configuration parameters that limit user-specified external video feeds to single-frame snapshots. | 4.2.4 The CCTV System Manager needs to configure the performance of video streams directed to external destinations based on the capabilities and limitations of the external system and communications. 4.5.1 |
| 3.1.6.1.9 | The CCTV System shall accept configuration parameters that control the interval at which single-frame snapshots are sent to external video feeds configured to receive them. | 4.2.4 The CCTV System Manager needs to configure the performance of video streams directed to external destinations based on the capabilities and limitations of the external system and communications. 4.5.1 The CCTV System User needs to create low bandwidth copies of CCTV video feeds and make them available to the general public via internet sites. |
| 3.1.6.1.10 | The CCTV System shall accept parameters for controlling the video performance of video streams supplied from external systems. (This control may be provided in the communications or digital video standard being supported.) [Specify the performance requirements for the external video streams] | 4.5.11.2 The CCTV System User needs to direct externally supplied video streams to video displays managed by the system. |
| 3.1.6.1.11 | The CCTV System shall allow the CCTV System User to assign specific cameras to specific field devices that may need monitoring, such as DMS, roadway gates, ramp meters, traffic signals, toll plazas, lane control signals, variable speed limit signs, etc. | 4.6.1 The CCTV System User needs to select displayed camera feeds of field devices to display on video monitors. 4.6.2 4.6.2.1 4.6.2.2 4.6.2.3 4.6.2.4 4.6.2.5 4.6.2.6 4.6.2.7 4.6.2.8 |
| 3.1.6.2 | System Logging | 4.10 CCTV System Logging |
| 3.1.6.2.1 | The CCTV System shall allow the CCTV System Maintainer to access and review the CCTV System log(s). | 4.10.1 The CCTV System Maintainer needs to access and review the CCTV System log(s). |
| 3.1.6.2.2 | The CCTV System shall allow the CCTV System Maintainer to specify what CCTV System events [specify, events may be alarms, user actions, or diagnostic] are logged. | 4.10.2 The CCTV System Maintainer needs to specify what CCTV System events are logged. |
| 3.1.6.2.3 | The CCTV System shall allow the CCTV System Maintainer to specify the size of the CCTV System log(s). | 4.10.3 The CCTV System Maintainer needs to specify the log size and/or duration for the CCTV System. |
| 3.1.6.2.4 | The CCTV System shall allow the CCTV System Maintainer to specify the length of time that entries in the CCTV System log(s) will be retained. | 4.10.3 The CCTV System Maintainer needs to specify the log size and/or duration for the CCTV System. |
| 3.1.6.2.5 | The CCTV System shall allow the CCTV System Maintainer to configure diagnostic reports of logged information for a period of [specify] days. [Specify pre-configured reports that may be needed by the maintainer.] | 4.10.4 The CCTV System Maintainer needs to access and review a history (log) of the following diagnostic information [specify] and alarms [specify] for a period of [specify] days. |
| 3.1.6.3 | Recorded Video | 4.11 Recorded Video |
| 3.1.6.3.1 | The CCTV System shall allow the CCTV System User to record video for later use. | 4.11.1 The CCTV System User needs to record video for later use. |
| 3.1.6.3.2 | The CCTV System shall allow the CCTV System User to initiate recording of a particular camera's video feed. | 4.11.2 The CCTV System User needs to initiate recording of a particular camera's video feed. |
| 3.1.6.3.2.1 | The CCTV System shall allow the CCTV System User to schedule and set the start and duration of the video recording. | 4.11.2.1 The CCTV System User needs to schedule and set the start and duration of the video recording. |
| 3.1.6.3.2.2 | The CCTV System shall allow the CCTV System User to initiate the recording based on a time of day schedule. | 4.11.2.2 The CCTV System User may initiate the recording based on a configured time-of-day schedule. |
| 3.1.6.3.2.3 | The CCTV System shall allow the CCTV System User to define a trigger condition at which the CCTV System will commence recording. [Specify the trigger condition(s)]. | 4.11.2.3 The CCTV System User may initiate the recording based on the presence of a defined condition [user must define these trigger conditions, which may include such events as detected incidents]. |
| 3.1.6.3.3 | The CCTV System shall allow the CCTV System User to play back a particular camera's recorded video feed. | 4.11.3 The CCTV System User needs to initiate playback of a particular camera's recorded video feed. |
| 3.1.6.3.3.1 | The CCTV System shall allow the CCTV System User to initiate playback. | 4.11.3 The CCTV System User needs to initiate playback of a particular camera's recorded video feed. |
| 3.1.6.3.3.2 | The CCTV System shall allow the CCTV System User to pause the playback. | 4.11.3 The CCTV System User needs to initiate playback of a particular camera's recorded video feed. |
| 3.1.6.3.3.3 | The CCTV System shall allow the CCTV System User to advance the video playback at higher speed. | 4.11.3 The CCTV System User needs to initiate playback of a particular camera's recorded video feed. |
| 3.1.6.3.3.4 | The CCTV System shall allow the CCTV System User to reverse the video playback. | 4.11.3 The CCTV System User needs to initiate playback of a particular camera's recorded video feed. |
| 3.1.6.3.3.5 | The CCTV System shall allow the CCTV System User to reverse the video at higher speed. | 4.11.3 The CCTV System User needs to initiate playback of a particular camera's recorded video feed. |
| 3.1.6.3.3.6 | The CCTV System shall allow the CCTV System User to select a specific location in the video recording to commence playback. | 4.11.3 The CCTV System User needs to initiate playback of a particular camera's recorded video feed. |
| 3.1.6.3.3.7 | The CCTV System shall allow the CCTV System User to record single-frame snapshots as separate images during video playback. | 4.11.3 The CCTV System User needs to initiate playback of a particular camera's recorded video feed. |
| 3.1.6.3.4 | The CCTV System shall allow the CCTV System User to route a particular camera's recorded video feed to any available video destination controlled by the system. | 4.11.4 The CCTV System User needs to be able to distribute a particular camera's recorded video feed. |
| 3.1.6.3.5 | The CCTV System shall allow the CCTV System User to delete recordings of a particular camera's video feed. | 4.11.5 The CCTV System User needs to delete recordings of a particular camera's recorded video feed. |
| 3.1.6.3.5.1 | The CCTV System shall require user confirmation when deleting a recorded video feed. | 4.11.5 The CCTV System User needs to delete recordings of a particular camera's recorded video feed. |
| 3.1.6.3.6 | The CCTV System shall allow the CCTV System User to log all video recordings [specify location, camera, timestamp, duration, anything else]. | 4.11.6 The CCTV System User needs a log of all video recordings. [to include location, camera, timestamp, duration, and whatever else the user specifies] |
| 3.1.6.3.7 | The CCTV System shall allow the CCTV System User to apply retention rules to the recorded video. [Specify the retention rules, or reference the appropriate retention policy document.] | 4.11.7 The CCTV System User needs to apply retention rules [must be defined by the user] to recorded video. |
| 3.1.6.3.8 | The CCTV System shall automatically delete videos in accordance with the retention rules specified by the CCTV System User. | 4.11.8 The CCTV System User needs to automatically delete videos in accordance with retention rules. |
| 3.1.6.3.9 | The CCTV System shall allow the CCTV System User to mark video recordings for permanent storage. | 4.11.9 The CCTV System User needs to mark recordings for permanent storage. |
| 3.1.6.3.10 | The CCTV System shall store the video recordings according to a specified compression algorithm. [Specify preferred standard compression algorithm(s)]. | 4.11.10 The CCTV System User needs to store the video efficiently. [Describe the preferred standard compression algorithm.] |
| 3.1.7 | CCTV Camera Characteristics | 4.12 CCTV Camera Characteristics |
| 3.1.7.1 | The CCTV System shall allow the CCTV System User to view images in reduced visibility conditions. [The CCTV System Designer will be expected to design features of cameras that fulfill these requirements, including heaters, wipers, infrared sensitivity, lighting, etc.] | 4.12.1 The CCTV System User needs to view images in reduced visibility conditions. |
| 3.1.7.1.1 | The CCTV System shall allow the CCTV System User to view images at night. | 4.12.1.1 The CCTV System User needs to view images at night. |
| 3.1.7.1.2 | The CCTV System shall allow the CCTV System User to view images in fog. | 4.12.1.2 The CCTV System User needs to view images in fog. |
| 3.1.7.1.3 | The CCTV System shall allow the CCTV System User to view images in rain. | 4.12.1.3 The CCTV System User needs to view images in rain. |
| 3.1.7.1.4 | The CCTV System shall allow the CCTV System User to view images in snow conditions. | 4.12.1.4 The CCTV System User needs to view images in snow conditions. |
| 3.1.7.1.5 | The CCTV System shall allow the CCTV System User to view images in other reduced visibility conditions [specify conditions]. | 4.12.1.5 The CCTV System User needs to view images in other reduced visibility conditions [specify]. |
| 3.1.7.2 | The CCTV System shall allow the CCTV System User to view clear, steady images. | 4.12.2 The CCTV System User needs to view steady, clear images. [Leads to requirements for bandwidth, latency, image reliability, pole stiffness, camera imaging standard, vibration reduction/image stabilization, digital zooming, etc.] |
| 3.1.7.2.1 | The CCTV System shall provide a specified image quality. | 4.12.2 The CCTV System User needs to view steady, clear images. [Leads to requirements for bandwidth, latency, image reliability, pole stiffness, camera imaging standard, vibration reduction/image stabilization, digital zooming, etc.] |
| 3.1.7.2.1.1 | The CCTV System shall support resolutions of [specify 480i, 480P, 720P, 1080P, 4K, etc.] | 4.12.2 The CCTV System User needs to view steady, clear images. [Leads to requirements for bandwidth, latency, image reliability, pole stiffness, camera imaging standard, vibration reduction/image stabilization, digital zooming, etc.] |
| 3.1.7.2.1.2 | The CCTV System shall support frame rates of [specify]. | 4.12.2 The CCTV System User needs to view steady, clear images. [Leads to requirements for bandwidth, latency, image reliability, pole stiffness, camera imaging standard, vibration reduction/image stabilization, digital zooming, etc.] |
| 3.1.7.2.1.3 | The CCTV System shall support a color gamut of [specify, may be embodied in those SDTV and HDTV standards]. | 4.12.2 The CCTV System User needs to view steady, clear images. [Leads to requirements for bandwidth, latency, image reliability, pole stiffness, camera imaging standard, vibration reduction/image stabilization, digital zooming, etc.] |
| 3.1.7.2.2 | The CCTV System shall provide adequate bandwidth to accommodate [specify number] of CCTV System Users at a given time. | 4.12.2 The CCTV System User needs to view steady, clear images. [Leads to requirements for bandwidth, latency, image reliability, pole stiffness, camera imaging standard, vibration reduction/image stabilization, digital zooming, etc.] |
| 3.1.7.2.3 | The CCTV System shall provide latency less than [specify] milliseconds. [This the time lag from reality to displayed image, and affects control lag. 100 ms is a typical value.] | 4.12.2 The CCTV System User needs to view steady, clear images. [Leads to requirements for bandwidth, latency, image reliability, pole stiffness, camera imaging standard, vibration reduction/image stabilization, digital zooming, etc.] |
| 3.1.7.2.4 | The CCTV System shall provide camera mounting systems sufficiently rigid to provide steady images. (The designer will be required to specify, for the relevant location and camera lens focal length, the required rigidity.) | 4.12.2 The CCTV System User needs to view steady, clear images. [Leads to requirements for bandwidth, latency, image reliability, pole stiffness, camera imaging standard, vibration reduction/image stabilization, digital zooming, etc.] |
| 3.1.7.2.5 | The CCTV System shall provide camera image stabilization. | 4.12.2 The CCTV System User needs to view steady, clear images. [Leads to requirements for bandwidth, latency, image reliability, pole stiffness, camera imaging standard, vibration reduction/image stabilization, digital zooming, etc.] |
| 3.1.7.2.6 | The CCTV System shall provide camera optics with a zoom range that provides optical coverage that fulfills all the requirements included in this document. [Include one of the child requirements below] | 4.12.2 The CCTV System User needs to view steady, clear images. [Leads to requirements for bandwidth, latency, image reliability, pole stiffness, camera imaging standard, vibration reduction/image stabilization, digital zooming, etc.] |
| 3.1.7.2.6.1 | The CCTV camera shall not use digital zoom. | 4.12.2 The CCTV System User needs to view steady, clear images. [Leads to requirements for bandwidth, latency, image reliability, pole stiffness, camera imaging standard, vibration reduction/image stabilization, digital zooming, etc.] |
| 3.1.7.2.6.2 | The CCTV System shall provide digital zooming of the cameras [specify] beyond their optical zooming capability. | 4.12.2 The CCTV System User needs to view steady, clear images. [Leads to requirements for bandwidth, latency, image reliability, pole stiffness, camera imaging standard, vibration reduction/image stabilization, digital zooming, etc.] |
| 3.1.7.2.7 | The CCTV System shall allow the CCTV System User to program camera presets to return to specified preset angle, zoom and focus [specify accuracy] when not under active CCTV System user control. | 4.12.3 The CCTV System User needs to program cameras to return to preset angle, zoom and focus [at the needed specified accuracy] when not under active CCTV System User control. |
| 3.1.7.3 | The CCTV System shall allow the CCTV System User to store information about each CCTV camera. | 4.12.4 The CCTV System User needs to store the following information in the CCTV System:
|
| 3.1.7.3.1 | The CCTV System shall allow the CCTV System User to set and store the CCTV Owner information of the CCTV camera. | 4.12.4 The CCTV System User needs to store the following information in the CCTV System:
|
| 3.1.7.3.2 | The CCTV System shall allow the CCTV System User to store the unique identifier of the CCTV camera. | 4.12.4 The CCTV System User needs to store the following information in the CCTV System:
|
| 3.1.7.3.2 | The CCTV System shall allow the CCTV System User to store the unique identifier of the CCTV camera. | 4.14.2 The CCTV devices in a CCTV System need to be uniquely identifiable and locatable. |
| 3.1.7.3.3 | The CCTV System shall allow the CCTV System User to set and store the CCTV Location information of the CCTV camera. | 4.12.4 The CCTV System User needs to store the following information in the CCTV System:
4.14.2 |
| 3.1.7.3.4 | The CCTV System shall allow the CCTV System User to set and store the CCTV image rate characteristics information [specify still image, slow scan, streaming video (e.g., 30 fps, etc.] of the CCTV camera. | 4.12.4 The CCTV System User needs to store the following information in the CCTV System:
|
| 3.1.7.3.5 | The CCTV System shall allow the CCTV System User to set and store the supported formats [specify JPEG, MPEG, etc. and protocols] for the CCTV camera. | 4.12.4 The CCTV System User needs to store the following information in the CCTV System:
|
| 3.1.7.3.6 | The CCTV System shall allow the CCTV System User to set and store the supported image size in pixels for the CCTV camera. | 4.12.4 The CCTV System User needs to store the following information in the CCTV System:
|
| 3.1.7.3.7 | The CCTV System shall allow the CCTV System User to set and store the CCTV cameras' distribution policies [specify, not for public, on as needed basis, etc.]. | 4.12.4 The CCTV System User needs to store the following information in the CCTV System:
|
| 3.1.7.3.8 | The CCTV System shall allow the CCTV System User to set and store whether the CCTV camera is available for remote control. | 4.12.4 The CCTV System User needs to store the following information in the CCTV System:
|
| 3.1.7.3.9 | The CCTV System shall allow the CCTV System User to set and store other CCTV camera characteristics [specify]. | 4.12.4 The CCTV System User needs to store the following information in the CCTV System:
|
| 3.1.8 | CCTV Camera Siting and Viewing | 4.13 CCTV Camera Siting and Viewing |
| 3.1.8.1 | The CCTV System Designer shall locate CCTV cameras to provide [specify] coverage of segments of the transportation environment. | 4.13.1 The CCTV System User needs to monitor segments of the transportation environment requiring multiple CCTV cameras. |
| 3.1.8.1.1 | The CCTV System Designer shall locate multiple CCTV cameras that view contiguous segments of roadway. [Specify roadway segments.] | 4.13.1.1 The CCTV System User needs to view contiguous segments of roadway [This need should be addressed by the agency in preparing the plans, not necessarily as a requirement on the CCTV system vendor. Need to reconcile.]. |
| 3.1.8.1.2 | The CCTV System Designer shall locate multiple CCTV cameras with overlapping CCTV camera coverage to prevent camera gaps resulting from a single camera failure. [Specify extent of required coverage area.] | 4.13.1.2 The CCTV System User needs CCTV cameras with overlapping coverage to prevent coverage gap due to a single camera failure. [This need should be addressed by the agency in preparing the plans, not necessarily as a requirement on the CCTV system vendor. Need to reconcile. Leave a place for the agency to specify, with instructions for tailoring the related requirements.] |
| 3.1.8.1.3 | The CCTV System Designer shall determine CCTV camera placement based on other user requirements. [Specify other requirements.] | 4.13.1.3 The CCTV System User needs to place cameras in specific locations. [Depending on whether we support just vendor requirements or also consultant design requirements, this need may replace all the others in this group]. |
| 3.1.8.1.4 | The CCTV System Designer shall determine CCTV camera placement to allow the CCTV System User to monitor regular lanes. | 4.13.1.4 The CCTV System User needs to monitor regular lanes. |
| 3.1.8.1.5 | The CCTV System Designer shall determine CCTV camera placement to monitor express lanes. | 4.13.1.5 The CCTV System User needs to monitor express lanes. |
| 3.1.8.1.6 | The CCTV System Designer shall determine CCTV camera placement to monitor reversible lanes. | 4.13.1.6 The CCTV System User needs to monitor reversible lanes. |
| 3.1.8.1.7 | The CCTV System Designer shall determine CCTV camera placement to monitor shoulders and/or shoulder running lanes. | 4.13.1.7 The CCTV System User needs to monitor shoulders and/or shoulder running lanes. |
| 3.1.8.1.8 | The CCTV System Designer shall determine CCTV camera placement to monitor freeways and arterials with [specify] allowable gaps. | 4.13.1.8 The CCTV System User needs to monitor freeways and arterials with [specify] allowable gaps. |
| 3.1.8.1.9 | The CCTV System Designer shall determine CCTV camera placement for camera coverage of all lanes in both directions. | 4.13.1.9 The CCTV System User needs camera coverage of all lanes in both directions. |
| 3.1.8.1.10 | The CCTV System Designer shall determine CCTV camera placement to monitor alternate route conditions during an incident. | 4.13.1.10 The CCTV System User needs to monitor the condition of alternate routes during an incident. |
| 3.1.8.1.11 | The CCTV System Designer shall determine CCTV camera placement to monitor an interchange. | 4.13.1.11 The CCTV System User needs to monitor an interchange. |
| 3.1.8.1.12 | The CCTV System Designer shall determine CCTV camera placement to monitor toll facilities. | 4.13.1.12 The CCTV System User needs to monitor toll facilities. |
| 3.1.8.1.13 | The CCTV System Designer shall determine CCTV camera placement to monitor interchange merge areas. | 4.13.1.13 The CCTV System User needs to monitor interchange merge areas. |
| 3.1.8.1.14 | The CCTV System Designer shall determine CCTV camera placement to monitor interchange diverge areas. | 4.13.1.14 The CCTV System User needs to monitor interchange diverge areas. |
| 3.1.8.1.15 | The CCTV System Designer shall determine CCTV camera placement to monitor interchange weave areas. | 4.13.1.15 The CCTV System User needs to monitor interchange weave areas. |
| 3.1.8.1.16 | The CCTV System Designer shall determine CCTV camera placement to monitor events. | 4.13.1.16 The CCTV System User needs to monitor events. |
| 3.1.8.1.17 | The CCTV System Designer shall determine CCTV camera placement to visually verify events. | 4.13.1.17 The CCTV System User needs to visually verify events. |
| 3.1.8.1.18 | The CCTV System Designer shall determine CCTV camera placement to monitor for incidents. | 4.13.1.18 The CCTV System User needs to monitor for incidents. |
| 3.1.8.1.19 | The CCTV System Designer shall determine CCTV camera placement to visually verify incidents. | 4.13.1.19 The CCTV System User needs to visually verify incidents. |
| 3.1.8.1.20 | The CCTV System Designer shall determine CCTV camera placement to monitor bridges, including drawbridges. | 4.13.1.20 The CCTV System User needs to monitor bridges, including drawbridges. |
| 3.1.8.1.21 | The CCTV System Designer shall determine CCTV camera placement to monitor tunnels. | 4.13.1.21 The CCTV System User needs to monitor tunnels. |
| 3.1.8.1.22 | The CCTV System Designer shall determine CCTV camera placement to monitor for stalled vehicles in HOV lanes. | 4.13.1.22 The CCTV System User needs to monitor for stalled vehicles in HOV lanes. |
| 3.1.8.1.23 | The CCTV System Designer shall determine CCTV camera placement to tour HOV lane CCTV cameras and determine lane clearance. | 4.13.1.23 The CCTV System User needs to tour HOV lane cameras and determine lane clearance. |
| 3.1.8.1.24 | The CCTV System Designer shall determine CCTV camera placement to monitor HOT lane entry and exit points. | 4.13.1.24 The CCTV System User needs to monitor HOT lane entry and exit points. |
| 3.1.8.1.25 | The CCTV System Designer shall determine CCTV camera placement to monitor managed lanes. | 4.13.1.25 The CCTV System User needs to monitor managed lanes. |
| 3.1.8.1.26 | The CCTV System Designer shall determine CCTV camera placement to monitor part-time shoulder use. | 4.13.1.26 The CCTV System User needs to monitor part-time shoulder use. |
| 3.1.8.1.27 | The CCTV System Designer shall determine CCTV camera placement to monitor planned events. | 4.13.1.27 The CCTV System User needs to monitor planned events. |
| 3.1.8.1.28 | The CCTV System Designer shall determine CCTV camera placement to monitor planned lane or interchange closures or diversions, including long-term construction, parades and festivals. | 4.13.1.28 The CCTV System User needs to monitor planned lane or interchange closures or diversions, including long-term construction, parades and festivals. |
| 3.1.8.1.29 | The CCTV System Designer shall determine CCTV camera placement to detect and monitor traffic conditions due to unplanned events such as early school closures. | 4.13.1.29 The CCTV System User needs to detect and monitor traffic conditions due to unplanned events such as early school closures. |
| 3.1.8.1.30 | The CCTV System Designer shall determine CCTV camera placement to observe and note overall traffic conditions on the arterial network. | 4.13.1.30 The CCTV System User needs to observe and note overall traffic conditions on the arterial network. |
| 3.1.8.1.31 | The CCTV System Designer shall determine CCTV camera placement to observe the effectiveness [specify queuing, intersection blockage, traffic signal faults and excessive delays, etc.] of arterial signal timing. | 4.13.1.31 The CCTV System User needs to observe the effectiveness of arterial signal timing. That effectiveness includes queuing, intersection blockage, traffic signal faults and excessive delays. |
| 3.1.8.1.32 | The CCTV System Designer shall determine CCTV camera placement to observe and monitor key 'high accident' locations. | 4.13.1.32 The CCTV System User needs to observe and monitor key "high accident" locations. |
| 3.1.8.2 | The CCTV System designer shall site the camera to accommodate maintenance activities. [Specify activities.] | 4.13.2 The CCTV System Designer needs to have camera siting take into account maintenance needs. [specify] |
| 3.1.8.2.1 | The CCTV System camera siting shall accommodate parking a maintenance vehicle off the highway. | 4.13.2 The CCTV System Designer needs to have camera siting take into account maintenance needs. [specify] 4.14.3 |
| 3.1.8.2.2 | The CCTV System camera shall be mounted to provide access to a CCTV System maintainer without use of a bucket truck or person lift. (This may be accommodated by use of a lowering device or other access technology.) | 4.13.2 The CCTV System Designer needs to have camera siting take into account maintenance needs. [specify] 4.14.3 |
| 3.1.8.2.3 | The CCTV System camera siting shall take into account other constraints [specify]. | 4.13.2 The CCTV System Designer needs to have camera siting take into account maintenance needs. [specify] |
| 3.1.8.3 | Special Operational Viewing Requirements | 4.13.3 Special Operational Viewing Needs |
| 3.1.8.3.1 | The CCTV System shall allow the CCTV System User to read HAZMAT placards. | 4.13.3.1 The CCTV System User needs to read hazmat placards. |
| 3.1.8.3.2 | The CCTV System shall allow the CCTV System User to read license plates. | 4.13.3.2 The CCTV System User needs to read license plates. |
| 3.1.8.3.3 | The CCTV System shall allow the CCTV System User to determine incident severity. | 4.13.3.3 The CCTV System User needs to determine incident severity. |
| 3.1.8.3.4 | The CCTV System shall allow the CCTV System User to identify individuals. | 4.13.3.4 The CCTV System User needs to identify individuals. |
| 3.1.8.4 | The CCTV System shall allow the CCTV System User to view a minimum [specify number] of video feeds simultaneously. | 4.13.4 The CCTV System User needs to view a minimum of [specify] video feeds at any one time. |
| 3.1.8.5 | The CCTV System shall allow the CCTV System User to manage a minimum [specify number] of cameras. | 4.13.5 The CCTV System User needs to manage a minimum of [specify] cameras. |
| 3.1.9 | CCTV System Maintenance | 4.14 CCTV System Maintenance |
| 3.1.9.1 | The CCTV System shall allow the CCTV System Maintainer to maintain CCTV System operations. | 4.14.1 The CCTV System Maintainer needs to maintain CCTV System operations. |
| 3.1.9.2 | The CCTV System shall provide the CCTV System User with durable equipment [specify description of what durable equipment means]. | 4.14.1.1 The CCTV System User needs durable equipment. [Add descriptions of what this means] |
| 3.1.9.3 | The CCTV System Designer shall provide field equipment that complies with environmental standards. | 4.14.1.2 The CCTV System User needs equipment designed for environmental conditions. Specify what this entails. [Description needs to include conditions under which the equipment will be operated. Does it need to withstand rain? Inundation? High-pressure hose-down? High wind? High (or low) temperatures? IPC67? IEC 60529? NEMA (Type R, Type X, etc.)? Ground cabinets versus cameras.] |
| 3.1.9.3.1 | The CCTV System Field Equipment shall comply with NEMA TS1 temperature standards | 4.14.1.2 The CCTV System User needs equipment designed for environmental conditions. Specify what this entails. [Description needs to include conditions under which the equipment will be operated. Does it need to withstand rain? Inundation? High-pressure hose-down? High wind? High (or low) temperatures? IPC67? IEC 60529? NEMA (Type R, Type X, etc.)? Ground cabinets versus cameras.] |
| 3.1.9.3.2 | The CCTV System Field Equipment shall comply with ANSI/IEC 60529-2004 standards. | 4.14.1.2 The CCTV System User needs equipment designed for environmental conditions. Specify what this entails. [Description needs to include conditions under which the equipment will be operated. Does it need to withstand rain? Inundation? High-pressure hose-down? High wind? High (or low) temperatures? IPC67? IEC 60529? NEMA (Type R, Type X, etc.)? Ground cabinets versus cameras.] |
| 3.1.9.3.3 | The CCTV System Ground infrastructure shall be NEMA Type R (rainproof). | 4.14.1.2 The CCTV System User needs equipment designed for environmental conditions. Specify what this entails. [Description needs to include conditions under which the equipment will be operated. Does it need to withstand rain? Inundation? High-pressure hose-down? High wind? High (or low) temperatures? IPC67? IEC 60529? NEMA (Type R, Type X, etc.)? Ground cabinets versus cameras.] |
| 3.1.9.3.4 | The CCTV System Ground infrastructure shall be NEMA Type X (submersible). | 4.14.1.2 The CCTV System User needs equipment designed for environmental conditions. Specify what this entails. [Description needs to include conditions under which the equipment will be operated. Does it need to withstand rain? Inundation? High-pressure hose-down? High wind? High (or low) temperatures? IPC67? IEC 60529? NEMA (Type R, Type X, etc.)? Ground cabinets versus cameras.] |
| 3.1.9.4 | The CCTV System shall allow the CCTV System Users to monitor cameras from multiple locations. | 4.14.1.3 The CCTV System User needs to monitor cameras from multiple locations. |
| 3.1.9.5 | The CCTV System shall provide the CCTV System Maintainer with serviceable field equipment. | 4.14.1.4 The CCTV System Maintainer needs serviceable field equipment. |
| 3.1.9.5.1 | The CCTV System field equipment [specify] shall have a Mean Time Between Failure (MTBF) of [specify]. | 4.14.1.4 The CCTV System Maintainer needs serviceable field equipment. |
| 3.1.9.5.2 | The CCTV System field equipment [specify] shall have a Mean Time To Repair (MTTR) of [specify]. | 4.14.1.4 The CCTV System Maintainer needs serviceable field equipment. |
| 3.1.9.6 | The CCTV System shall have replacement parts [specify type and quantity] available through the CCTV System Owner to provide to the CCTV System Maintainer for the life of the system [specified period of time]. | 4.14.1.5 The CCTV System Maintainer needs to have access to replacement parts for the life of the system [specified period of time]. |
| 3.1.9.7 | The CCTV System shall allow the CCTV System Maintainer to remotely test devices [specify] via IP protocol. | 4.14.1.6 The CCTV System Maintainer needs to remotely test devices via IP protocol. |
| 3.1.9.8 | The CCTV System shall allow the CCTV System Maintainer to access CCTV camera current diagnostic information. | 4.14.1.7 The CCTV System Maintainer needs diagnostic information that the camera collects about itself at the direction of the Maintainer. |
| 3.1.9.9 | The CCTV System shall allow the CCTV System Maintainer to setup the following [specify, such as loss of communication, failure to zoom, focus, aperture control or temperatures outside the environmental limits] failure conditions to trigger alarms visible to the CCTV System User. | 4.14.1.8 The CCTV System Maintainer needs the following failure conditions to trigger alarms visible to the CCTV System User. Failure conditions may include failure of zoom, focus, aperture control, or temperatures outside of environmental limits. |
| 3.1.9.10 | The CCTV System Provider shall provide the CCTV System Maintainer with remote updates of camera and PTZ controller firmware. | 4.14.4 The CCTV System Maintainer needs to update camera and PTZ controller firmware remotely. |
| 3.1.9.11 | The CCTV System Provider shall provide the CCTV System Maintainer with remote updates of CCTV System software. | 4.14.5 The CCTV System Maintainer needs to update CCTV system software remotely. |
| 3.1.10 | Constraints/External Interfaces | 4.15 Interfaces |
| 3.1.10.1 | The CCTV System shall allow the CCTV System User to interface with cameras from different manufacturers within the same system, meeting the same user needs. [Specify the different products to be supported by this requirement.] | 4.15.1 The CCTV System User needs to interface with cameras from different manufacturers within the same system, while satisfying all the user needs. [specify what cameras are being used] |
| 3.1.10.2 | The CCTV System shall support cameras from different manufacturers. [Specify manufacturers and products.] | 4.15.2 The CCTV System Maintainer needs to replace cameras with cameras from different manufacturers. |
| 3.1.10.3 | The CCTV System shall support ONVIF IP-based camera interface standards [specify]. | 4.15.3 The CCTV System Designer needs to adopt ONVIF IP-based camera interface standards, which may require coexisting with NTCIP-based interfaces on the same IP network. |
| 3.1.10.4 | The CCTV System shall support the coexistence of ONVIF IP-based camera interface standards and NTCIP-based interfaces on the same IP network. | 4.15.3 The CCTV System Designer needs to adopt ONVIF IP-based camera interface standards, which may require coexisting with NTCIP-based interfaces on the same IP network. |
| 3.1.10.5 | The CCTV System shall allow the CCTV System Maintainer to integrate new cameras with an existing CCTV System [specify existing system interface and standards]. | 4.15.4 The CCTV System Designer needs to integrate new cameras with an existing CCTV System [specify existing system interface]. |
| 3.1.10.6 | The CCTV System shall allow the CCTV System Maintainer to integrate with existing cameras. Existing cameras may include analog video feeds from an existing analog CCTV System [specify existing camera interfaces]. | 4.15.5 The CCTV System Designer needs to integrate a new CCTV System with existing cameras, which may include analog video feeds from an existing analog CCTV System. [specify existing camera interfaces]. |
| 3.1.10.7 | The CCTV System shall accommodate existing communications interfaces [specify]. | 4.15.6 The CCTV System Designer needs to accommodate existing communications interfaces [specify]. |
| 3.1.10.8 | The CCTV System shall accommodate agency IT policies [specify]. | 4.15.7 The CCTV System Designer needs to follow agency IT policies. [specify] |
| 3.1.10.9 | The CCTV System shall allow the CCTV System User to interface with an external system to identify incident locations and direct a camera with appropriate coverage area to the incident. | 4.15.8 The CCTV System User needs to interface with an external system to identify incident locations and direct a camera with appropriate coverage area to the incident. |
| 3.1.10.10 | The CCTV System shall allow the CCTV System User to interface with an external CCTV System to direct the display of video from the other system. | 4.15.9 The CCTV System User needs to interface with external CCTV Systems to direct the display of video from the other system, to control the cameras on the other system, or to configure the other system. |
| 3.1.10.11 | The CCTV System shall allow the CCTV System User to interface with an external CCTV System to control the cameras on the other system. | 4.15.9 The CCTV System User needs to interface with external CCTV Systems to direct the display of video from the other system, to control the cameras on the other system, or to configure the other system. |
| 3.1.10.12 | The CCTV System shall allow the CCTV System User to interface with an external CCTV System to configure the other system. | 4.15.9 The CCTV System User needs to interface with external CCTV Systems to direct the display of video from the other system, to control the cameras on the other system, or to configure the other system. |
| 3.1.10.13 | The CCTV System shall allow external CCTV Systems to route video within the CCTV System. | 4.15.10 The CCTV System User needs to interface with external CCTV Systems to allow the other system to direct the display of video, to control the cameras, or to configure the user's CCTV system. |
| 3.1.10.14 | The CCTV System shall allow external CCTV Systems to control the cameras on the CCTV System. | 4.15.10 The CCTV System User needs to interface with external CCTV Systems to allow the other system to direct the display of video, to control the cameras, or to configure the user's CCTV system. |
| 3.1.10.15 | The CCTV System shall allow external CCTV Systems to configure the CCTV System. | 4.15.10 The CCTV System User needs to interface with external CCTV Systems to allow the other system to direct the display of video, to control the cameras, or to configure the user's CCTV system. |
| 3.1.10.16 | The CCTV System shall interface with NTCIP system components [Specify], such as automatic camera selection or control, or automatic video feed display assignment. (The NTCIP components may have to coexist with ONVIF-based interfaces.) | 4.15.11 The CCTV System User needs to interface with existing NTCIP system components [specify], such as for automatic camera selection or control, or automatic video feed display assignment. The NTCIP components may have to coexist with ONVIF-based interfaces. |
| 3.1.11 | CCTV System Performance | 4.16 CCTV System Performance |
| 3.1.11.1 | The CCTV System shall accommodate [specify, this may be defined by bandwidth consumption per user] users at any one time. | 4.16.1 The CCTV System Owner needs to accommodate [specify] users at any one time. (This may be defined by bandwidth consumption per user.) |
| 3.1.11.2 | The CCTV System shall accommodate [specify] number of users simultaneously controlling the CCTV System's cameras. | 4.16.1 The CCTV System Owner needs to accommodate [specify] users at any one time. (This may be defined by bandwidth consumption per user.) |
