Office of Operations
21st Century Operations Using 21st Century Technologies

Appendix A. Example Verification Cross Reference Matrix

The following table is an example of a verification cross reference matrix (VCRM) from a system test plan. The requirements listed in the example are for the video subsystem only and include the system specification requirement statement, the paragraph reference number (with "shall" statement number in parenthesis if more than one requirement is included in the reference paragraph), and the verification method(s) (Inspection, Certification of Compliance, Analysis, Demonstration, and Test). These first three columns of the matrix appear in the system specification and are referred to in that document as the requirements verification matrix. The last three columns: test level (1, 2, 3, 4 or 5), test responsibility (who is responsible for verifying the requirement), and test identification number (i.e., which specific test(s)-in this case at system level 4 or 5-will verify the requirement) are added in the system test plan to complete the VCRM.

Table A-1 Verification Cross Reference Matrix
System Requirement Para. No. Verif. Method Test Level Test Resp. Level 4&5 Test ID
The video function of the ITS shall consist of the subsystem and components required to collect video information from facilities and roadway, and distribute this video to operators and managers at the TMCs and Highway Patrol Dispatch Center. 3.3.3.1(1) I/C 2

Installation Contractor/
Vendor

Video functional element shall include a dedicated surveillance closed circuit television (CCTV) network. 3.3.3.1(2) I/C 2 Installation Contractor/
Vendor
 
The CCTV network shall accept and distribute video signals originating outside the dedicated network. 3.3.3.1(3) D 4 ITS Consultant 2
Components of the CCTV network shall include the roadway deployed cameras, communication, video switching, camera controls, facility security cameras, video recorders and video monitors. 3.3.3.1(4) I/C 2 Installation Contractor/
Vendor
 
The ITS shall include CCTV cameras along the roadways and other areas of interest to provide system operators a visual indication of traffic and incidents on the roadways. 3.3.3.2(1) I/C 2 Installation Contractor/
Vendor
 
The ITS shall include CCTV cameras along the roadways and other areas of interest to provide system operators a visual indication of traffic and incidents on the roadways. 3.3.3.1(1) D 3 ITS Consultant
The ITS shall include CCTV cameras along the roadways and other areas of interest to provide system operators a visual indication of traffic and incidents on the roadways. 3.3.3.1(1) D 4 ITS Consultant 2
Camera shall support full motion video capability. 3.3.3.2(2) I/C 2 ITS Consultant
Video from roadway cameras shall be transmitted to the TMC with the primary operational responsibility for the section of the turnpike on which that camera is located. 3.3.3.3(1) D 4 ITS Consultant 2
Any subset of video images (minimum of 8) transmitted to TMC shall also be available for monitoring at both control centers. 3.3.3.3(2) I/C 2 Installation Contractor/
Vendor
Any subset of video images (minimum of 8) transmitted to TMC shall also be available for monitoring at both control centers. 3.3.3.3(2) D 3 ITS Consultant
Any subset of video images (minimum of 8) transmitted to TMC shall also be available for monitoring at both control centers. 3.3.3.3(2) D 4 ITS Consultant 2
A subset (minimum of 8) of video images transmitted to TMC shall be available for monitoring at the Highway Patrol Dispatch Center. 3.3.3.3(3) I/C 2 Installation Contractor/
Vendor
A subset (minimum of 8) of video images transmitted to TMC shall be available for monitoring at the Highway Patrol Dispatch Center. 3.3.3.3(3) D 3 ITS Consultant
A subset (minimum of 8) of video images transmitted to TMC shall be available for monitoring at the Highway Patrol Dispatch Center. 3.3.3.3(3) D 4 ITS Consultant 2
Each TMC and the Highway Patrol Dispatch Center shall have individual switching control of these video images. 3.3.3.3(4) D 3 ITS Consultant
Each TMC and the Highway Patrol Dispatch Center shall have individual switching control of these video images. 3.3.3.3(4) D 4 ITS Consultant 2
Access controls shall be implemented to deny unauthorized access to video switching functions identified herein. 3.3.3.3(5) A/T 3 ITS Consultant
Access controls shall be implemented to deny unauthorized access to video switching functions identified herein. 3.3.3.3(5) 4 ITS Consultant 2
The ITS shall support the installed camera base for the TMCs. 3.3.3.4(1) A 1 ITS Consultant
Capability shall be designed into the video function element to support a minimum of 20% growth in the installed camera base. 3.3.3.4(2) I/C 2 Installation Contractor/
Vendor
Each console workstation shall have a video monitor. 3.3.3.5(1) I 2 Installation Contractor/
Vendor
The workstation shall provide the operator with the capability to monitor or display a single video source or multiple (minimum of 4) video sources. 3.3.3.5(2) I/C 2 Installation Contractor/
Vendor
The workstation shall provide the operator with the capability to monitor or display a single video source or multiple (minimum of 4) video sources. 3.3.3.5(2) D 3 ITS Consultant
The workstation shall provide the operator with the capability to monitor or display a single video source or multiple (minimum of 4) video sources. 3.3.3.5(2) D 4 ITS Consultant 2
The Operator Workstation shall include all necessary controls for the operator to select the video source(s) to be viewed and define the position on the video monitor for each selected source to be displayed. 3.3.3.5(3) I/C 2 Installation Contractor/
Vendor
The Operator Workstation shall include all necessary controls for the operator to select the video source(s) to be viewed and define the position on the video monitor for each selected source to be displayed. 3.3.3.5(3) D 3 ITS Consultant
The Operator Workstation shall include all necessary controls for the operator to select the video source(s) to be viewed and define the position on the video monitor for each selected source to be displayed. 3.3.3.5(3) D 4 ITS Consultant 2
A capability to select and display blank screen (null video) source(s) shall be provided. 3.3.3.5(4) D 3 ITS Consultant
A capability to select and display blank screen (null video) source(s) shall be provided. 3.3.3.5(4) D 4 ITS Consultant 2
The operator shall also have the capability to select and control the pan-tilt-zoom (PTZ), iris and focus functions of any camera available to the operator for control. 3.3.3.5(5) D 3 ITS Consultant
The operator shall also have the capability to select and control the pan-tilt-zoom (PTZ), iris and focus functions of any camera available to the operator for control. 3.3.3.5(5) D 4 ITS Consultant 2
Selection of a camera for PTZ control shall automatically select that camera input for display on the operator workstation monitor. 3.3.3.5(6) D 3 ITS Consultant
Selection of a camera for PTZ control shall automatically select that camera input for display on the operator workstation monitor. 3.3.3.5(6) D 4 ITS Consultant 2
The controlling jurisdiction for the camera shall have PTZ control for each camera, but the ITS shall make provisions to allow remote PTZ control only with the approval and authorization of that controlling jurisdiction. 3.3.3.5(7) A/D 3 ITS Consultant
The controlling jurisdiction for the camera shall have PTZ control for each camera, but the ITS shall make provisions to allow remote PTZ control only with the approval and authorization of that controlling jurisdiction. 3.3.3.5(7) D 4 ITS Consultant 2
Relinquishing control shall be through a method that prevents accidental passing of camera control. 3.3.3.5(8) A/T 3 ITS Consultant
Relinquishing control shall be through a method that prevents accidental passing of camera control. 3.3.3.5(8) 4 ITS Consultant 2
Operational protocols shall limit control for camera to one operator at a time. 3.3.3.5(9) A/T 3 ITS Consultant
Operational protocols shall limit control for camera to one operator at a time. 3.3.3.5(9) D 4 ITS Consultant 2
Other monitors within a management or control center shall be able to simultaneously display operator workstation video. 3.3.3.5(10) D 4 ITS Consultant 2
The ITS shall provide for additional video monitors to support crisis management, day-to-day operation and group viewing. 3.3.3.6(1) I 2 Installation Contractor/
Vendor
This monitor only capability shall include standard monitors and large screen displays and may include integrated computer screen monitors. 3.3.3.6(2) I/C 2 Installation Contractor/
Vendor
Video inputs and outputs shall allow the ITS video subsystem to connect to external video interfaces. 3.3.3.7(1) D 4 ITS Consultant 2
Video from external inputs shall be selectable internal to the ITS for viewing on monitors within the system. 3.3.3.7.1(1) D 4 ITS Consultant 2
The external video inputs shall selectable and viewable from any location having the capability to switch and monitor the roadway camera video. 3.3.3.7.1(2) D 4 ITS Consultant 2
ITS shall provide the capability to accept, switch, and monitor local television and cable and/or direct broadcast satellite channels for weather, traffic, and incident information in compliance with the constraints of agreements and rights of these sources. 3.3.3.7.1.1(1) A/D 3 ITS Consultant
ITS shall provide the capability to accept, switch, and monitor local television and cable and/or direct broadcast satellite channels for weather, traffic, and incident information in compliance with the constraints of agreements and rights of these sources. 3.3.3.7.1.1(1) 4 ITS Consultant 2
Audio from television channels shall route to the display location(s) of the corresponding video that have an associated audio output capability. 3.3.3.7.1.1(2) A/D 3 ITS Consultant
Audio from television channels shall route to the display location(s) of the corresponding video that have an associated audio output capability. 3.3.3.7.1.1(2) D 4 ITS Consultant 1,2
The ITS video switching network shall provide connections to accept video "feeds" transmitted from mobile camera equipment mounted on helicopters, airplanes, or motorized vehicles for localized surveillance of areas not covered by the fixed camera installations. 3.3.3.7.1.2(1) I/C 2 Installation Contractor/
Vendor
The ITS video switching network shall provide connections to accept video "feeds" transmitted from mobile camera equipment mounted on helicopters, airplanes, or motorized vehicles for localized surveillance of areas not covered by the fixed camera installations. 3.3.3.7.1.2(1) D 3 ITS Consultant
The ITS video switching network shall provide connections to accept video "feeds" transmitted from mobile camera equipment mounted on helicopters, airplanes, or motorized vehicles for localized surveillance of areas not covered by the fixed camera installations. 3.3.3.7.1.2(1) D 4 ITS Consultant 2
The ITS shall provide video output connections for use by the broadcast media for dissemination external to the ITS. 3.3.3.7.2(1) I/C 2 Installation Contractor/
Vendor
The ITS shall provide video output connections for use by the broadcast media for dissemination external to the ITS. 3.3.3.7.2(1) D 3 ITS Consultant
The ITS shall provide video output connections for use by the broadcast media for dissemination external to the ITS. 3.3.3.7.2(1) D 4 ITS Consultant 2
Access controls shall be established to prevent unauthorized access. 3.3.3.7.2(2) I/C 2 Installation Contractor/
Vendor
Access controls shall be established to prevent unauthorized access. 3.3.3.7.2(2) D 3 ITS Consultant
Access controls shall be established to prevent unauthorized access. 3.3.3.7.2(2) D 4 ITS Consultant 2
Video recording capability shall be provided in each TMC and the Highway Patrol Dispatch Center. 3.3.3.8(1) I/C 2 Installation Contractor/
Vendor
Each operator workstation shall have access to a video recording capability. 3.3.3.8(2) I/C 2 Installation Contractor/
Vendor
Each operator workstation shall have access to a video recording capability. 3.3.3.8(2) D 3 ITS Consultant
Each operator workstation shall have access to a video recording capability. 3.3.3.8(2) D 4 ITS Consultant 2
The operators shall have the capability to record and playback any video available at the workstation. 3.3.3.8(3) I/C 2 Installation Contractor/
Vendor
The operators shall have the capability to record and playback any video available at the workstation. 3.3.3.8(3) D 3 ITS Consultant
The operators shall have the capability to record and playback any video available at the workstation. 3.3.3.8(3) D 4 ITS Consultant 2
The recording capability shall provide control and accessibility determined through an access control mechanism. 3.3.3.8(4) I 2 Installation Contractor/
Vendor
The recording capability shall provide control and accessibility determined through an access control mechanism. 3.3.3.8(4) D 3 ITS Consultant  
The recording capability shall provide control and accessibility determined through an access control mechanism. 3.3.3.8(4) D 4 ITS Consultant 2
All video source recording shall be performed in compliance with the constraints of agreements and rights of these sources. 3.3.3.8(5) A/D 3 ITS Consultant
All video source recording shall be performed in compliance with the constraints of agreements and rights of these sources. 3.3.3.8(5) D 4 ITS Consultant 2
A minimum of two (2) record and playback units shall be provided at each TMC. 3.3.3.8(6) I/C 2 Installation Contractor/
Vendor
The Highway Patrol Dispatch Center shall have a minimum of one (1) record and playback unit. 3.3.3.8(7) I/C 2 Installation Contractor/
Vendor

Previous | Next
Office of Operations